Superior Lubrication and Protection in Automotive and Industrial Applications With Extensive Exposure to Water
Package sizes include:
3-oz. Cartridges (not sold individually, comes in a pack of 3)
3-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 10 & 40)
AMSOIL Synthetic Water Resistant Grease meets the highest performance standards set by the National Lubrication Grease Institute (NLGI), GC for wheel bearing applications and LB for chassis applications. It may be used in automotive wheel bearings, chassis or other applications for which an NLGI No. 2 GC or LB grease is recommended. Its unique water-resistant formulation makes it ideal for use in components or equipment with frequent or prolonged water exposure.
AMSOIL Synthetic Water Resistant Grease is an extreme-pressure grease formulated specially for wet-duty performance. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, Water Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Its water washout and sprayoff resistance are outstanding for applications frequently exposed to water, mud, snow or ice, including ATVs, UTVs, snowmobiles and boat trailers.
AMSOIL Synthetic Water Resistant Grease gains its wet-duty performance from its superior cohesiveness and adhesiveness. It holds together when exposed to water and clings tenaciously to metal surfaces when wet. Components remain protected during prolonged exposure to standing or pressurized water.
AMSOIL Synthetic Water Resistant Grease protects metal surfaces from corrosion, which may be worsened by frequent or prolonged water contact. It seals metal surfaces and chemically fights corrosion.
AMSOIL Synthetic Water Resistant Grease protects components from metal-to-metal contact even under heavy loads. Its extreme-pressure additives protect against sustained or sudden extreme loads for dependable protection against wear.
AMSOIL Synthetic Water-Resistant Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Water-Resistant Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
AMSOIL Synthetic Water Resistant Grease is available in 3-oz. cartridges, 14-oz. cartridges, 35-lb. lugs and 120-lb. kegs.
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).
Keep out of the reach of children. Don't pollute. Return used oil to collection centers.
|Typical Technical Properties|
|Synthetic Water Resistant Grease (GWR)||GWR||NLGI GC/LB Requirements|
|Thickener||calcium sulfonate complex||NR*|
|NLGI consistency grade||2||NR*|
|NLGI performance grade||GC-LB||NR*|
|Penetration (ASTM D-217) (25°C [77°F], 0.1 mm) worked 60 strokes||277||220-340 min|
|Operating Range °F (°C)||-40 to 350 (-40 to 177)||NR*|
|Dropping point, °F (°C) (ASTM D-2265)||>500 (>260)||428 (220) min|
|High temperature life, hours (ASTM D-3527)||115||80 min|
|Water washout, percent (ASTM D-1264)||1.25||15 max|
|Rust and corrosion (ASTM D-1743)||pass||pass|
|Oil separation, percent loss (ASTM D-1742) (24 hours, 25°C [77°F])||0||6.0 max|
|Leakage, g lost (ASTM D-4290)||4.2||10 max|
|Four-ball wear test, mm scar (ASTM D-2266)||0.42||0.60 max|
|Fretting wear, mg (ASTM D-4170)||2.5||10 max|
|Four ball EP, kgf (ASTM D-2596)Weld pointLoad wear index||50070||200 min30 min|
|Timken OK load test, lbs (ASTM D-2509)||70||NR*|
|Low-temperature torque, N•m (ASTM D-4693) (-40°C [-40°F])||6.8||15.5 max|
|Oil viscosity, 40°C (104°F), cSt||165||NR*|
|Texture||smooth with tack||NR*|
|*NR: Not required for NLGI GC-LB labeling|